slewing ring storage

(1)Finished bearing must be horizontal, not allowed to be erected or placed askew.
(2)Placed bearing contact surfaces must be smooth, not allowed to have uneven, otherwise it will cause bearing deformation.
(3)Bearing storage environment must be dry, clean and dust free.
(4)If multiple overlapping store, each bearing placed along the circumferential direction at least three uniform between the contour of wood, and the lower level pad should be placed together, aligned from top to bottom, each other can't dislocation.
(5)Finished bearing package must be opened prior to installation, do not wash rust inhibitor.
(6)Absolute prohibition dismantle bearings, or cancel the guarantee.
(7)Product packaging bearing factory has been underway for oil seal, packaged products bearing under suitable conditions for 6 months, if the idle time more than 6 months, bearing every six months to a new antirust oil seal packing. Bearing raceway lubrication once every 12 months.
(8)Leave unused bearing “oil seal packing” likes followings：
A：take the bearing from the wooden cases
B：open the packing carefully without destroying bearing seal;open it from the most outer layer step by step apart.
C：after opening the bearing, fill in standard grease oil on raceway,clean surface oil prohibiting to use chlorinated solvent, and prevent solvent to get into the race through seal.
D：After oil removal,clean surface, coat with antirust oil (F20-1)or industrial vaseline (SY1607-77) evenly.
E：then put bearing in wooden cases according to the original packing method. Considering storage environment, nail a layer of felt in the wooden cases for moisture-proof and waterproof